|Laser Power:||300W ( Other Power Are Optional )||Wavelength:||1064nm|
|Max. Single Pulse Energy:||60J||Pulse Width:||0.1～20.0ms|
|Welding Spot Size:||0.2～1.5mm||Observe System:||CCD Monitor|
|Positioning:||Red Light Indication||Cooling System:||Water Cooling|
|Electricity Requirement:||17kW，three Phase||Welding Depth:||0.1～3.0mm|
|Chuck Diameter:||80-190mm||Max. Weight Bearing:||Less Than 100KG|
Medical Apparatus and Instruments Laser Welding Systems Power 300W with 3 Axis Linkage
1, Machine’s introductions:
ST-T300-M Series design special for medical apparatus and instruments dot laser welding, machine adopts the high precision motor and adjustable rotary chuck which can achieve the automatic laser welding, our this kinds of laser welding machine with 3 or 4 axis which controlled by machine software, the rotary device can be adjusted from 0 – 90 degree, it has the very high precision , fast welding efficiency and welding strength comparing with the other kinds of tranditional welding method .
2, Machine’s main advantages:
Comparing with the traditional welding technology,laser welding with the advantage as follows :
2.1 Fast speed, high depth and almost no deformation.
2.2 In the room or special conditions for the welding and welding equipment. for example, a simple laser by the magnetic field. the beam will not be offset ； laser in a vacuum, air and some gas in the environment could apply soldering, and passed the glass or beam transparent material to welding.
2.3 Can weld the difficult melt material, such as the titanium, quartz etc. Can weld the isomerism material with good quality.
2.4 High power density after laser focus.When high power workpiece welding,depth ratio can be 5:1,tiptop can be up to 10:1.
2.5 Can be used for minisize weld. The laser beam is focused to a light, and make accurate positioning can be used in mass production, automated a small piece in. the group of welding
2.6 To be welded inaccessible areas, such a long distance welding, contact with flexibility.